HDPE PLASTIC PIPE AND FITTINGS

HDPE Pipes and Fittings are manufactured from High Density Polyethylene compound. It is different from normal PE at the amount of monomers in larger molecular chain. Therefore, HDPE possesses toughness and high impact strength, unique chemical durability, endures cracking pressure due to environment impact and good electrical insulation.

ISO & Standard

ISO 4427-2:2007/ TCVN 7305-2:2008

Size

Wall thickness : 2.0mm – 57.2mm
OD : Ø20 – Ø630mm
Length : 6 – 200m

Fields of application

Potable water distribution
Irrigation and watering in agriculture
Underground power cable – Basic standard.
Sand Pump – Basic standard.
Well – Drilling – Basic standard.
Round conduit & Flexible conduit
Industrial process pipelines
Others: sewer mains, drainage pipelines…

Colors

Black color

Chemical properties

Resistance to: Acid, alkaline solutions and neutral solvent.
Non-resistance to: Concentrated oxidizing acids and halogen agents.

Physical properties

Density: Min 0.93 g/cm3
Surface resistivity: 10^12 Ωm
Melt flow index: 1.4g/ 10 minutes
Dimension: supply in inch, metric and CIOD system.

Advantagest of HDPE pipes:

High tightness (watertight, airtight), leak-free.
Long life span (designed lifetime of pipe is over 50 years when correct using complies with technical requirement.
Ability to resist against wide array of chemicals.
Low cost of installation and maintenance, long life span.
Non-toxic, not affecting to human health.

HIGH LIGHT ADVANTAGEST OF HDPE PIPES:

Light-weight, ease of handling.
Shiny inner and outer surface, small coefficient of friction.
Correct using in comply with technical requirement leads the life span of over 50 years.
Ability to perform under sunlight, unable to be ionized under UV radiation of sunlight.
Low installation cost compared with other kinds of pipes.